The Sledez Snowmobile Dolly was designed to be a simple way to move your snowmobile without having to pick it up. The snowmobile does all the work in loading and unloading, all you have to do is roll it to where you want to store it and with its four three inch swiveling caster it’s easy to get it into the tightest places. The other key feature of the Sledez is it’s one piece design that doesn’t take up any more room than your snowmobile when it’s loaded on the dolly and once the snowmobile is loaded simply lock your brake and it’s never going to fall off the dolly like other conventional dollies when hitting cracks, holes, garage door approaches, and uneven pavement. So not only does the Sledez save you time, it also saves your back from strains and saves your garage floors, and driveways from them grueling carbides and picks.
The contemporary, sleek design takes moving a snowmobile to new levels. Just one look at the SLEDEZ and you can see the passion that went into the design. Its looks are a combination of a fighters' attitude with sleek sophistication. More attention than ever has gone into every detail to create this stylish dolly that rolls with ease.
One piece Pro Scale Ramp has diamond plate textured ramp.
Recessed pocket holds scale in place, and roll off area to let you roll your vehicle on and off scales with ease to release any side bind for accurate wheel weights. Recessed pocket with four sides to keep the scales in place**
**Scale is not included
Racer’s Edge Industries, Inc. introduces Pro Scale Ramps the first ever one piece scale ramps that holds a racing scale from Longacre, Intercomp,and Rebco or any other 15”x15”x2 ½” scale. The Pro Scale Ramps design starts off with a diamond plate textured ramp which lets you roll your vehicle up and down. Then goes to the recessed pocket with four sides, which holds the scale in place and has a five degree angle that slopes to the top so the ramp never interferes with the scale. Then goes into the roll off area which lets you roll your vehicle on and off the scale with ease to release any side bind in the front end and helps achieve accurate wheel weights. There are seven one inch round rubber feet on the bottom to keep the Pro Scale Ramps from sliding around on the ground. The Pro Scale Ramps dimensions are 48” long by 17 3/4” wide by 3 1/8” high and weight 15 pounds apiece and are rated at 1500 pounds per ramp. The Pro Scale Ramps are the most durable ramps on the market today. They are sold as a set of four. Includes a one year warranty. Pro Scale Ramps are made of molded plastic with a double wall and made in the USA.
Sledez Drive On Drive Off Snowmobile Dolly
Sledez is available in black color only!
The Sledez Snowmobile Dolly was designed to be a simple way to move your snowmobile without having to pick it up. The snowmobile does all the work in loading and unloading, all you have to do is roll it to where you want to store it and with its four three inch swiveling caster it’s easy to get it into the tightest places. The other key feature of the Sledez is it’s one piece design that doesn’t take up any more room than your snowmobile when it’s loaded on the dolly and once the snowmobile is loaded simply lock your brake and it’s never going to fall off the dolly like other conventional dollies when hitting cracks, holes, garage door approaches, and uneven pavement. So not only does the Sledez save you time, it also saves your back from strains and saves your garage floors, and driveways from them grueling carbides and picks.
The contemporary, sleek design takes moving a snowmobile to new levels. Just one look at the SLEDEZ and you can see the passion that went into the design. Its looks are a combination of a fighters' attitude with sleek sophistication. More attention than ever has gone into every detail to create this stylish dolly that rolls with ease.
Check out our other videos at www.youtube.com/sledez!
Key Features Of The Sledez Snowmobile Dolly:
Manufactured of plastic to be lightweight and durable.
Plastic design allows for easy loading and unloading. Skis slide over the dolly smoothly.
Plastic reinforced with steel tubing to add strength.
Adjustable to accommodate a large variety of snowmobiles. Designed to even accommodate older sleds.
Large caster wheels to roll over even the toughest terrain.
Instructions
Loading:
Roll dolly between skis under the snowmobile so that the tail section (bottom of “T”) is touching the front part of the snowmobile’s track.
Make sure the dolly is centered and that the skis are equal distance from the center of the dolly.
Adjust the head of the “T” so that it is at least 6” from touching the front of the skis.
Start snowmobile.
Making sure you are ready to engage the brake begin to slowly drive onto dolly.
Stop snowmobile when the skis are centered on the head of the “T”.
Turn snowmobile off and engage snowmobile’s parking brake.
Unloading:
Fully extend parking brake rope on ground in front of dolly.
Make sure all objects are clear of the rear of the snowmobile and dolly.
Start snowmobile and disengage the snowmobile parking brake.
Making sure you are ready to engage brake, slowly engage throttle to drive snowmobile off of dolly.
Advance snowmobile past braking rope.
DOESN'T YOUR SLED DESERVE THE BEST?
At SLEDEZ we believe in working hard and playing hard but the two don't mix! . . . . That is why the SLEDEZ snowmobile dolly is a must have for every snowmobile enthusiast!
